‘Aniline leather’ means leather whose natural grain is clearly and completely visible and where any surface coating with a non-pigmented finish is less than or equal to 0,01 mm, as defined in EN 15987;

‘Semi-aniline leather’ means leather that has been coated with a finish containing a small amount of pigment, so that the natural grain is clearly visible, as defined in EN 15987;

‘Pigmented and pigmented split leather’ means leather or split leather whose natural grain or surface is completely concealed with a finish containing pigments, as defined in EN 15987;

‘Patent and patent split leather’ means leather or split leather with generally a mirror-like effect, obtained by application of a layer of pigmented or non-pigmented varnishes, or synthetic resins, whose thickness does not exceed one third of the total thickness of the product, as defined in EN 15987;

‘Coated and coated split leather’ means leather or split leather where the surface coating, applied to the outer side, does not exceed one third of the total thickness of the product but is in excess of 0,15 mm, as defined in EN 15987;

‘Volatile organic compound’ (VOC) means any organic compound having an initial boiling point of less than or equal to 250 °C measured at a standard pressure of 101,3 kPa as defined in Directive 2004/42/EC of the European Parliament and of the Council ( 2 ) and which, in a capillary column, are eluting up to and including tetradecane (C14H30);

‘Semi volatile organic compound’ (SVOC) means any organic compound having a boiling point of greater than 250 °C and less than 370 °C measured at a standard pressure of 101,3 kPa and which, in a capillary column are eluting with a retention range after n-tetradecane (C14H30) and including n-Docosane (C22H46);

‘Recycled content’ means the proportion, by mass, of recycled material in a product or packaging; only pre-consumer and post-consumer materials are considered as recycled content, as defined in ISO 14021;

‘Pre-consumer material’ means material diverted from the waste stream during a manufacturing process but excluding the reutilization of materials such as rework, regrind or scrap generated in a process and capable of being reclaimed within the same process that generated it as defined in ISO 14021 and also excludes waste wood, chips and fibres from logging and sawmilling operations;

‘Post-consumer material’ means material generated by households or by commercial, industrial and institutional facilities in their role as end-users of the product which can no longer be used for its intended purpose, including returns of material from the distribution chain, as defined in ISO 14021;

‘Recovered/reclaimed material’ means material that would have otherwise been disposed of as waste or used for energy recovery, but has instead been collected and recovered/reclaimed as a material input, in lieu of new primary material, for a recycling or a manufacturing process, as defined in ISO 14021;

‘Recycled material’ means material that has been reprocessed from recovered/reclaimed material by means of a manufacturing process and made into a final product or into a component for incorporation into a product as defined in ISO 14021, but excludes waste wood, chips and fibres from logging and sawmilling operations;

‘Wood-based panels’ means panels fabricated from wood fibres by one of several different processes that may involve the use of elevated temperatures, pressures and binding resins or adhesives;

‘Oriented Strand Board’ means multi-layered board mainly made from strands of wood together with a binder, as defined in EN 300. The strands in the external layer are aligned and parallel to the board length or width. The strands in the internal layer or layers can be randomly orientated or aligned, generally at right angles to the strands in the external layers;

‘Particleboard’ means a panel material manufactured under pressure and heat from particles of wood (wood flakes, chips, shavings, saw-dust and similar) and/or other lignocellulosic material in particle form (flax shives, hemp shives, bagasse fragments and similar), with the addition of an adhesive, as defined in EN 309;

‘Plywood’ means wood-based panels consisting of an assembly of layers glued together with the direction of the grain in adjacent layers usually at right angles, as defined in EN 313. Many different sub-categories of plywood can be referred to based on how the plywood is structured (such as, veneer plywood, core plywood, balanced plywood) or its predominant end use (for instance, marine plywood);

‘Fibreboards’ means a broad set of panel types which are defined in EN 316 and EN 622 and which can be split into the sub-categories of hardboards, medium boards, soft-boards and dry-process boards based on their physical properties and production process;

‘Readily biodegradable substance’ means a substance that shows 70 % degradation of dissolved organic carbon within 28 days or 60 % of theoretical maximum oxygen depletion or carbon dioxide generation within 28 days using one of the following test methods: OECD 301 A, ISO 7827, OECD 301 B, ISO 9439, OECD 301 C, OECD 301 D, ISO 10708, OECD 301 E, OECD 301 F, ISO 9408;

‘Inherently biodegradable substance’ means a substance that shows 70 % degradation of dissolved organic carbon within 28 days or 60 % of theoretical maximum oxygen depletion or carbon dioxide generation within 28 days using one of the following test methods: ISO 14593, OECD 302 A, ISO 9887, OECD 302 B, ISO 9888, OECD 302 C;

‘Finishing operations’ means methods where an over-layer or coating is applied to the surface of a material. Methods may include the application of paints, prints, varnishes, veneers, laminates, impregnated papers and finishing foils;

‘Biocidal product’ as defined in Regulation (EU) No 528/2012 of the European Parliament and of the Council ( 3 ) means:

‘Wood preservatives’ means biocidal products which are applied by surface treatment (e.g. spraying, brushing) or deep penetrating processes (e.g. vacuum-pressure, double vacuum) to wood (i.e., logs received at the sawmill for commercial use and for all subsequent uses of the wood and wood-based products) or wood-based products themselves, or which are applied to non-wood substrates (e.g. masonry and building foundations) solely for the purpose of protecting adjacent wood or wood-based products from attack by wood-destroying organisms (e.g. dry rot and termites) according to the definition agreed upon by the European Committee for Standardisation (source CEN/TC 38 ‘Durability of wood and wood-based products’);

‘E1’ means a classification for formaldehyde-containing wood-based panels adopted across EU Member States based on formaldehyde emissions. According to the definition provided in Annex B to EN 13986, a wood-based panel shall be classified as E1 if emissions are equivalent to steady state concentrations of less than or equal to 0,1 ppm (0,124 mg/m3) of formaldehyde after 28 days of a chamber test carried out according to EN 717-1 or that the formaldehyde content is determined to be less than or equal to 8 mg/100 g oven dry board when measured according to EN 120 or that formaldehyde emission rates are less than or equal to 3,5 mg/m2.h according to EN 717-2 or less than or equal to 5,0 mg/m2.h according to the same method but within 3 days after production;

‘Coated fabrics’ means fabrics with an adherent, discrete continuous layer of rubber and/or plastic based material on one or both surfaces, as defined in EN 13360, including upholstery materials commonly referred to as ‘faux leather’;

‘Textiles’ mean natural fibres, synthetic fibres and man-made cellulose fibres;

‘Natural fibres’ means cotton and other natural cellulosic seed fibres, flax and other bast fibres, wool and other keratin fibres;

‘Synthetic fibres’ means acrylic, elastane, polyamide, polyester and polypropylene fibres;

‘Man-made cellulose fibres’ means lyocell, modal and viscose fibres;

‘Upholstery’ means the materials used in the craft of covering, padding and stuffing of seating, bedding or other furniture products and may include covering materials such as leather, coated fabrics and textiles as well as padding materials such as flexible cellular polymeric materials based on rubber latex and polyurethane;

‘Substance’, means a chemical element and its compounds in the natural state or obtained by any manufacturing process, including any additive necessary to preserve its stability and any impurity deriving from the process used, but excluding any solvent which may be separated without affecting the stability of the substance or changing its composition, as defined in Article 3(1) of Regulation (EC) No 1907/2006 of the European Parliament and of the Council ( 4 );

‘Mixture’ means a mixture or solution composed of two or more substances as defined in Article 3(2) of Regulation (EC) No 1907/2006;

‘Component part’ means rigid and discrete units whose shape and form does not need to be altered prior to assembly of the final product in its fully functional form, although its position may change during use of the final product and includes hinges, screws, frames, drawers, wheels and shelves;

‘Component materials’ means materials whose shape and form may change prior to furniture assembly or during use of the furniture product, and includes textiles, leather, coated fabrics and polyurethane foams used in upholstery. Supplied timber may be considered as a component material but be later sawn and treated to be converted into a component part.